Looking for a digital voip service to use with your Aastra phones? Click HERE to view our multi-line voice plans and pricing.
To configure an Aastra 6XXX Series Phone, use the following generic walkthrough.
Your device may vary slightly, depending on model and firmware version.
1. Get the IP Address
- Press the Spanner key
- Press the scroll down button to get to Phone Status and then press [
] to confirm selection - Select IP&MAC Addresses and press [ ]
- The IP Address will appear on the screen. Make note of it for step 2.
2. Access the Web Management page
- Open your web browser and go to the IP you just found: https://[DeviceIP]
- If presented with a browser security warning. Confirm that you want to continue.
- Enter the user and password for the phone.
- Username: admin
- Password: xxxxx [Default password is often 22222]
3. Fill in the values as shown below.
- On the left menu select Line 1 under Advanced Settings
Screen Name: [your voiSip phone number, or PBX extension number]
Phone Number: [same phone or extension number]
Caller ID: [same phone or extension number]
Authentication Name: [same phone or extension number]
Password: xxxxxxxxxxx (enter your phone number's SIP password, or PBX extension secret)
Proxy Server: [enter any CLONE LINE server, or your PBX address]
Proxy Port: 5060 [5060 is most commonly used port]
Backup Proxy Port: 0
Outbound Proxy Port: 0
Registrar Server: [enter any CLONE LINE server, or your PBX address]
Registrar Port: 5060 [5060 is most commonly used port]
Backup Registrar Port: 0
- Click Save Settings.
4. Restart the Phone.
- Click on Reset under Operations on the left menu.
- Now click on Restart
- Phone will restart automatically
Once rebooting has completed, try some inbound and outbound test calls.
Let us know if you have any trouble with these instructions.
CLONE LINE Team
